01
Start with the right symbol and expiry
Start on the chart of the asset whose options you want to study, such as SPY. This asset is called the underlying. A strike is the price written into an option contract, and expiry is the date the contract ends. An options chain lists the available contracts.
1. Add Options Chart+ to a 5-minute chart. Set Trader Style to Intraday, Signal Sensitivity to Balanced, and Volume Timeframe to D for daily volume. This gives you a consistent starting point for the examples below.
2. For options expiring today (0DTE), turn on Auto Select Expiry and check the date in the header. For another expiry, turn it off and enter Option Expiry Date in YYMMDD format. For example, 261120 means 20 November 2026. Check that the selected expiry has listed contracts.
3. Check the spacing between listed strikes. If the automatic spacing is wrong, turn off Auto Strike Increment and enter the correct Strike Increment. For example, use 1 for strikes at 500, 501 and 502. If you enable Use Presets, recheck the expiry and strike spacing afterward.
4. Set Key Levels Display Style to Profile Top Strike and Top Strikes - Show Top X to 3. Keep the strike table visible and find the busiest call and put strikes. Check any delayed-data warning before following the price action.
02
Understand the dashboard labels
Call volume and put volume count contracts traded. A call trade is not automatically bullish: every trade has a buyer and a seller, and a trade may open or close a position. Options Chart+ Volume Delta means call volume minus put volume. It does not measure buying minus selling in the underlying.
ATM means at the money: a strike close to the underlying’s current price. ITM means in the money: a call strike below the underlying’s price, or a put strike above it. The premium is the option’s price.
| What you see | What it means | What to check next |
|---|---|---|
| Call / put wall | The strike with the most call / put volume among the strikes displayed. | Watch whether price stalls, reverses or continues through that strike. |
| Bias score | A summary of several call-versus-put activity and price measures. Trader Style changes their importance in the score. | Check which component readings support the score and which disagree. |
| DIM — Directional Implied Move | An options-price measure that compares calls and puts near the underlying’s price, with weights for volume and distance from that price. | Compare its direction with the volume readings, especially when Flow Conflict appears. |
| Max Volume Balance Strike | A strike with substantial trading in both calls and puts. | Check whether the underlying repeatedly returns to this price. |
| Volume Max Pain | A calculation of the underlying price that would produce the lowest total option payout at expiry, using traded volume as the weights. | Compare price with this reference alongside the nearby volume concentrations. Repeated trades in one contract can contribute repeatedly to its volume weight. |
| Strike Absorption | A nearby active strike with relatively balanced call and put volume. | Watch whether the underlying stalls at the strike or continues through it. |
03
Walk through the strike example
The screenshot shows a May 15 expiry and daily volume. The balance strike is 748, Volume Max Pain is 747, and the largest call-volume bar is at 750. Put activity is visible at 747 and 745. Start with these numbers; each label describes a different part of the options activity.
The underlying’s price is about 748.47. To investigate a possible move toward 750, first watch a pullback toward 748. Does price stay above 748, or move below it and struggle to get back? Holding above it supports the upward idea; falling through it weakens that idea and brings 747 into view.
04
Compare the dashboard with price
Flow Conflict means parts of the options dashboard disagree. For example, total call volume may be greater than put volume, while the contracts near the underlying’s price show the opposite balance. You can have a positive headline score and mixed evidence underneath it.
Write down one level and the time you chose it. Then watch price test that level. Labels can move as price and options activity change; keep your original level when reviewing the decision.
A retest is a return to a level after price has moved through it. Acceptance means price keeps trading on the new side; rejection means it returns and cannot stay beyond the level. A single touch is not enough to tell the difference.
| What you see | What it means | What to check next |
|---|---|---|
| Price moves above a busy call strike, then falls back below | The move above the level has failed so far. | See whether another attempt also fails. A later move that stays above it changes the reading. |
| Price closes above your recorded level, returns to it and holds above | The breakout has more support from price than a brief spike would. | Watch the next level above. Falling back below the level and the retest low weakens the idea. |
| Price repeatedly crosses the balance strike or max-pain level | Price is moving back and forth rather than choosing a clear direction. | Wait for a move away that holds. Do not treat every crossing as a new trend. |
05
Use the implied move to judge distance
Total Implied Move uses the latest prices of the selected ATM call and put, added together. The displayed range extends that amount above and below the underlying’s current price. For example, if the underlying is 500 and the two option prices add to 4, the displayed range is 496–504.
The range changes as the underlying and option prices change. Save a screenshot at the open if you want to compare later movement with the opening estimate. The orange curve projects the estimated range over time. Price can move beyond it, so use it to judge the size of a move rather than as an entry or exit trigger.
The Breakeven columns show strike plus call premium, or strike minus put premium. They apply to a simple purchased option held to expiry, before costs. They do not tell you the profit or loss from selling that option earlier, when its price also depends on time remaining and expected volatility.
06
Set an alert you know how to use
A velocity alert flags a fast change in an option’s last traded price. ATM ± 2 strikes means checking the strike nearest the underlying’s price plus two strikes on either side.
For the setup shown below, set Lookback Bars to 3, Price Change Threshold % to 25%, Minimum Option Price to 0.05 and Minimum Option Volume to 100. Turn on Require Fresh Update and Require Volume Confirmation to filter out stale or low-activity readings.
In TradingView’s alert dialog, select Options Chart+ and Any alert() function call. When an alert arrives, check the named contract, expiry and underlying price. Then check the current bid and ask—the prices buyers and sellers are quoting. The last traded price in an alert may not be a price you can trade at now.
07
If strikes or values are missing, check these three things
A blank row or unavailable value does not necessarily mean no options traded. The contract may be wrong, unavailable in your data feed, or outside the strikes currently displayed. Check the following in order.
| What you see | What it means | What to check next |
|---|---|---|
| 1. Symbol and expiry | Make sure you selected the asset and expiry date you intended. | Check the header. Try opening the exact option contract in TradingView to see whether your account can load it. |
| 2. Strike spacing and data | The strike spacing must match contracts that actually exist, and your account must have the required data access. | For example, do not request strikes one point apart if that expiry only lists them five points apart. Check any delayed or unavailable-data warning. |
| 3. Price has moved beyond the displayed strikes | The indicator works with a limited list of strikes. A large price move can leave that list centered too far away. | Open the indicator’s settings and click Reset Indicator to rebuild the list around the current price. Check the new strike table and save a fresh screenshot before making comparisons. |
A reset can change the walls because it changes which strikes are included. For example, suppose the old list ended at 510 and price has risen to 512. Rebuilding the list may bring a busy 515 strike into view. It can become the new call wall even if its volume accumulated earlier. Check the strike list before comparing readings across a reset.
Using SPY or SPX options on an ES chart is a separate setup. The options still belong to SPY or SPX; Converter+ places their levels on the ES price scale. Follow the linked setup guide before using that overlay.
Try it on your chart
Practice and review
Save a screenshot with the symbol, expiry date and three nearby strike levels. Watch price test one level without placing a trade. Write down whether it stayed beyond the level or returned, and what happened on the next visit. Keep the original screenshot so changing labels do not change your record.
Related reading
Historical charts are for illustration. Trading involves risk. Read our risk disclosure.
